I made a stand for my SB 10K light 10" from 2" black pipe and some angle iron. Where the lathe footprint sits i added some 1/2" plate in that area to drill the legs into. I also made a sheetmetal chip pan.
I also just made a stand for my SB10L heavy 10" using 4" sq tube for the legs and the top/chip pan is formed channel from 3/8" plate 20" wide to give it strength. The channel is turned upside down with the ears down. I don't have a pic yet of that one as its still in my shop...Bob
Pic 1 2" pipe stand. SB10K
Pic 2 Rack and swing out tool holder.
Pic 3 Chip pan, and the belt dosen't rub when its tight. |