[EdCaffreyMS]

There was a time when Grizzly advertised their belts (in the catalog and online) as being 2"X76", they have since changed that to read 2" X 72", but it makes me wonder if their still not sending belts out that are longer than 72".

I had some folks in the not too distant past contact complaining that the belts they got from Grizzly were too long for their machines. My response is to tell them to purchase their belts either from Tru-Grit in California, or from Pop's Knife Supply in Georgia. The belts from Grizzly are of questionable quality at best, but the two suppliers I mentioned sell only premium quality abrasives.

There was a time many moons ago when I tried to "save" money by purchasing inexpensive (read cheap) belts, but quickly realized that I was wasting money because it takes 3-4 of the cheap belts to do what one premium quality belt will do.