Thread
:
Leveling a lathe
View Single Post
#
8
(
permalink
)
10-03-2007, 06:06 PM
John N
Senior Member
Join Date: Aug 2007
Location: UK
Posts: 191
on a boat i doubt a spirit level / box square would be much use !
what most c/l turners will
never
admit is if the tollerance is really critical to a thou, or better than .001" then its a grinding job, and they are only roughing it out
John N
View Public Profile
Send a private message to John N
Visit John N's homepage!
Find all posts by John N