One of the big safety things I see in a lot of shops is steel storage. Even I do it and that's not good. I have stuff sticking out at head height and I have head banged, nearly poked out my eye and caught steel in the mouth. In my old shop I would stick Styrofoam blocks on the ends to slow down injury. Undersized electrical service is another big item too. I have seen under sized air mains in shops where they rely heavily on air driven equipment. They will run their compressor at a higher pressure to make up for the undersized main. They will also have the line sloped toward the air tool instead of back to the receiver and no auto drain on the tank.
|